HDMI TWP FLAT CABLE
Products
點擊圖片放大HDMI TWP FLAT CABLE
Optionally supports output of Dolby True HD and DTS-HD Master Audio streams for external decoding by AV receivers.( TrueHD and DTS-HD are lossless audio codec formats used on Bly-ray Discs and HD DVDs . )
Specifications
Optionally supports output of Dolby True HD and DTS-HD Master Audio streams for external decoding by AV receivers.( TrueHD and DTS-HD are lossless audio codec formats used on Bly-ray Discs and HD DVDs . )
1. Construction
Differential signal | Control and other signal | ||||
Conductor | Material | - | Silver coated annealed copper wire | Tin coated annealed copper wire | |
Diameter | mm | Approx. 0.254 (Size:30AWG) | |||
Insulation | Material | - | Foam PE | PE | |
Color | - | White , Red | Green , White , Red | ||
Diameter | mm | Approx. 0.7 | Approx. 0.5 | ||
Twisting | Composition | - | Two insulated conductors (White-wire and Red-wire) shall be uniformly twisted together. | - | |
Shield | Composition | 4 sets of twisted pairs, 4 sets of drain lines and 7 sets of control lines are arranged in alignment as shown in the attached drawing and wrapped by a shield tape. Shield tapes are also inserted between the twisted pairs, separating each pair. There should not be gaps in the wrapping shield tape and in the shield tapes between the twisted pairs. Also, both the ends of the wrapping shield should be glued without gaps, and the edged part glued should be neatly cut without forming a projection. | |||
Kind | - | For outsides : Aluminum Polyester Laminating Tape For inside : Aluminum Polyester Aluminum Laminating Tape | |||
Thickness | mm | For outsides : 0.025 (Al : 0.006) For inside : 0.03 (Al : 0.006) | |||
Drain | Material | - | Tin coated annealed copper wire | ||
Diameter | mm | Approx. 0.254 (Size : 30AWG) | |||
Jacket | Material | - | PVC | ||
Color | - | Black | |||
Thickness | mm | Nom. 0.5 | |||
Overall diameter | mm | H*W=1.85 ´ 11.5 ( ± 0.1 ) | |||
Marking | E54979 AWM 20276 80℃ 30V VW-1 TATUNG - HDMI | ||||
2. Rating
Rating Voltage | V | 30 |
Rating Temperature | ℃ | 80 |
3. Performance
Electrical Requirements
Conductor resistance | Ω/km | Max.361 ( at 20℃ ) |
Dielectric strength | V-min | To withstand 300 Volts R.M.S. for one minute. (Between all interconnected conductors, and all the interconnected shields.) |
Insulation resistance (Between conductor and earth) | MΩkm | Min. 10 This measurement shall be made with 150 volts D.C. after steady electrification for one minute. (During the tests, remaining conductors shall be connected to earth.) |
Differential impedance | Ω | Cable Area 100±10 Connector Area 100±15 |
Delay* | ns/m | Max. 5.05 |
Inter-Pair Skew* | ns | Max. 2.42 |
Intra-Pair Skew* | ps | Max. 151 |
Far-end crosstalk* | dB | Max. -26 dB (f=300k～5000MHz) |
Insertion Loss* | dB | Min. - 8 dB (f=300k～825MHz) Min. -21 dB (f=825M～2475MHz) Min. -30 dB (f=2475M～4125MHz) |
Capacitance** | pF | Max. 700 |
*Differential signal line
**Between Pin No.15 to No.17 and No.16 to No.17
4. Cable FLAME TEST
To conform to UL 1581 VW-1 combustion test.
5. RoHS Regulation
Material name | Rated value |
Cadmium and Cadmium Compounds | 75ppm |
Hexavalent Chromium Compounds | 1000ppm |
Lead and Lead Compounds | 300ppm |
Mercury and Mercury Compounds | 1000ppm |
PBB (Polybrominated Biphenyls) | 1000ppm |
PBDE（Polybrominated Diphenyl Ethers） | 1000ppm |
6. Cable Wire Assignment
Pin | Color | Cable Function |
1 | Red | TMDS Data 2+ |
3 | White | Green |
2 | Drain | TMDS Data 2 Shield |
4 | Red | TMDS Data 1+ |
6 | White | TMDS Data 1- |
5 | Drain | TMDS Data 1 Shield |
7 | Red | TMDS Data 1 Shield |
9 | Red | TMDS Data 0- |
8 | Drain | TMDS Data 0 Shield |
10 | Red | TMDS Data Clock+ |
12 | White | TMDS Data Clock- |
11 | Drain | TMDS Clock Shield |
13 | Green | CEC |
14 | Red | Reserved（N.C. on device） |
15 | White | SCL |
16 | Green | SDA |
17 | Red | DDC/CEC Ground |
18 | Red | +5V Power |
19 | White | +5V Power |
