FS-STP
Products
點擊圖片放大商品名稱:
FS-STP
詳細介紹:
This specification describes the Foam Skin insulated, star quad, polyethylene sheathed, aluminum and steel tape shielded (Stalpeth) telephone cable used for trunking between telephone stations and subscribers.
1. Scope :
This specification describes the Foam Skin insulated, star quad, polyethylene sheathed, aluminum and steel tape shielded (Stalpeth) telephone cable used for trunking between telephone stations and subscribers.
2. Conductor：0.4、0.5、0.65、0.9
3.Insulation：Foam-skin PE
4. Twisted：Four insulated conductor shall be twisted together
5. Assembly：Arranged in accordance with the structure figure
6. Core Wrap：Mylar tape、Non-woven wrapping tape、 non-woven water blocking tape
7. Aluminum tape and Tinned steel tape：
(1) A single shield of aluminum tape shall be applied longitudinally, thickness 0.2±0.05mm.
(2) A single shield of tinned steel tape shall be applied longitudinally, thickness 0.18±0.05mm.
(3) The outer layer of steel tape shall be homogeneously covered with one layer of non-hydroscopic flooding compound.
8. Sheath：Polyethylene sheath
9.
diameter of conductor (mm) | number of pairs (P) | standard thickness of insulation (mm) | cable core diameter (mm) appro. | width of longitudinal laid tape (mm) appro. | thickness of PE sheath (mm) | overall diameter (mm) appro. | gross weight (Kg/M) appro. |
|---|---|---|---|---|---|---|---|
400 | 0.11 | 26 | 25 | 1.5 | 32 | 1.57 | |
600 | 0.11 | 31 | 30 | 1.6 | 38 | 2.20 | |
800 | 0.11 | 35 | 30 | 1.8 | 42 | 2.81 | |
1000 | 0.11 | 40 | 35 | 1.9 | 48 | 3.40 | |
1200 | 0.11 | 43 | 35 | 2.0 | 51 | 4.08 | |
1400 | 0.11 | 47 | 40 | 2.1 | 55 | 4.69 | |
1600 | 0.11 | 50 | 40 | 2.2 | 58 | 5.29 | |
0.4 | 1800 | 0.11 | 52 | 40 | 2.3 | 61 | 5.88 |
2000 | 0.11 | 54 | 40 | 2.4 | 63 | 6.47 | |
2200 | 0.11 | 57 | 40 | 2.5 | 66 | 7.06 | |
2400 | 0.11 | 59 | 40 | 2.5 | 68 | 7.56 | |
2600 | 0.11 | 61 | 40 | 2.6 | 70 | 8.24 | |
2800 | 0.11 | 64 | 45 | 2.7 | 73 | 8.83 | |
3000 | 0.11 | 66 | 45 | 2.8 | 76 | 9.45 | |
3200 | 0.11 | 68 | 45 | 3.0 | 78 | 10.06 | |
400 | 0.13 | 31 | 25 | 1.6 | 38 | 2.21 | |
600 | 0.13 | 38 | 35 | 1.8 | 45 | 3.14 | |
800 | 0.13 | 42 | 35 | 1.9 | 50 | 4.05 | |
1000 | 0.13 | 48 | 40 | 2.1 | 56 | 4.97 | |
1200 | .013 | 53 | 40 | 2.3 | 61 | 5.96 | |
0.5 | 1400 | 0.13 | 57 | 40 | 2.5 | 66 | 6.88 |
1600 | 0.13 | 60 | 40 | 2.5 | 70 | 7.75 | |
1800 | 0.13 | 63 | 40 | 2.6 | 72 | 8.63 | |
2000 | 0.13 | 66 | 45 | 2.8 | 76 | 9.64 | |
2200 | 0.13 | 69 | 45 | 3.0 | 79 | 10.45 | |
2400 | 0.13 | 72 | 45 | 3.0 | 82 | 11.31 | |
400 | 0.15 | 38 | 35 | 1.8 | 45 | 3.42 | |
600 | 0.15 | 47 | 40 | 2.1 | 55 | 4.97 | |
0.65 | 800 | 0.15 | 53 | 40 | 2.3 | 61 | 6.45 |
100 | 0.15 | 59 | 40 | 2.5 | 68 | 7.95 | |
1200 | 0.15 | 65 | 45 | 2.8 | 74 | 9.47 | |
1400 | 0.15 | 70 | 45 | 3.0 | 80 | 10.96 | |
0.9 | 400 | 0.21 | 52 | 40 | 2.3 | 61 | 6.19 |
10.Electric Properties：
Item | 0.4 | 0.5 | 0.65 | 0.9 |
|---|---|---|---|---|
Conductor resistance | Standard value：139Ω/KM | Standard value：88.7Ω/KM | Standard value：52.5Ω/KM | Standard value：27.4Ω/KM |
Dielectric strength | DC500V / 1min. orAC350 V / 1min. | |||
Insulation resistance | 5000MW- Km DC 250~500V | |||
Near-End Cross-talk | 40KHz，AC Min value：58.5dB↑ | |||
Far-End Cross-talk | 160KHz，AC m-1.28×S≧55dB/㎞以上 m：Average value S：Standard value Min value：38dB/km↑ | |||
更多商品
FS-JF-LAP
This cable is a Foam Skin insulated, jelly filled, laminated sheathed, unit type cable for underground local telephone network, abbreviated to FS-JF-LAP cable. 1. Scope： This cable is a Foam Skin insulated, jelly filled, laminated sheathed, unit type cable for underground local telephone network, abbreviated to FS-JF-LAP cable. 2. Wire Construction： Wire Quad NO. A-wire B-wire C-wire D-wire 1 Blue White Brown Black 2 Yellow White Brown Black 3 Green White Brown Black 4 Red White Brown Black 5 Violet White Brown Black 3.Core Forming： 10P～200P Pair PE tape Pair PE tape pair PE tape 1-10P Blue-Blue 71-80P Green-White 141-150P Violet-Brown 11-20P Yellow-Yellow 81-90P Red-White 151-160P Blue-Black 21-30P Green-Green 91-100P Violet-White 161-170P Yellow-Black 31-40P Red-Red 101-110P Blue-Brown 171-180P Green-Black 41-50P Violet-Violet 111-120P Yellow-Brown 181-190P Red-Black 51-60P Blue-White 121-130P Green-Brown 191-200P Violet-Black 61-70P Yellow-White 131-140P Red-Brown 300P～600P Pair PE tape Pair PE tape pair PE tape 1-50P Blue-Blue 201-250P Violet-Violet 401-450P Red-White 51-100P Yellow-Yellow 251-300P Blue-White 451-500P Violet-White 1011-150P Green-Green 301-350P Yellow-White 501-550P Blue-Brown 151-200P Red-Red 351-400P Green-White 551-600P Yellow-Brown 4．Structure： 4.1. Conductor：0.4± 0.01mm 、0.5± 0.01mm 、0.65± 0.02mm 4.2. Number of pair：10、20、30、50、100、200、300、400、600 4.3. Insulation： Foam-skin PE 4.4. Twisted：Four insulated conductor shall be twisted together 4.5. Assembly：Arranged in accordance with the structure figure 4.6. Jelly-filled：Jelly compound should be filled the space within the cable core. 4.7. Core Wrap：Non – hygroscopic dielectric tape 4.8. Shield：Laminated Aluminum shield 0.2mm thickness, longitudinally laid on with over lap. 4.9. Sheath：PE5. Standards： Dia. of conductor (mm) Number of pairs (P) Insulation thickness (mm) cable core diameter (mm) approx. Sheath thickness (mm) overall diameter (mm) approx. estimated weight (Kg/m) Standard length (M) 0.4 10 0.13 5.5 1.7 9 0.09 500 0.4 20 0.13 7.0 1.7 11 0.13 500 0.4 30 0.13 8.5 1.7 12 0.18 500 0.4 50 0.13 10 1.7 14 0.25 500 0.4 100 0.13 14 1.7 18 0.44 500 0.4 200 0.13 20 1.7 24 0.80 500 0.4 300 0.13 24 1.9 28 1.15 500 0.4 400 0.13 28 2.0 33 1.60 500 0.4 600 0.13 33 2.2 39 2.27 500 0.5 10 0.15 6.5 1.7 10 0.11 500 0.5 20 0.15 8.0 1.7 12 0.18 500 0.5 30 0.15 10 1.7 14 0.24 500 0.5 50 0.15 12 1.7 16 0.35 500 0.5 100 0.15 17 1.7 21 0.63 500 0.5 200 0.15 23 1.8 27 1.16 500 0.5 300 0.15 29 2.0 34 1.67 500 0.5 400 0.15 33 2.2 39 2.30 500 0.5 600 0.15 39 2.3 45 3.20 500 0.65 10 0.20 8 1.7 12 0.16 500 0.65 20 0.20 11 1.7 15 0.28 500 0.65 30 0.20 13 1.7 17 0.36 500 0.65 50 0.20 16 1.7 20 0.54 500 0.65 100 0.20 23 1.8 27 1.00 500 0.65 200 0.20 31 2.0 36 1.85 500 0.65 300 0.20 37 2.2 42 2.76 500 0.65 400 0.20 42 2.3 48 3.80 500 0.65 600 0.20 51 2.6 57 5.40 345 Item 0.4 0.5 0.65 Conductor resistance Standard value：139Ω/KMMax. value：147.5Ω/KM Standard value：88.7Ω/KMMax. value：93.5Ω/KM Standard value：52.5Ω/KMMax. value：56.5Ω/KM Mutual capacitance 50P↑→ 55 nf/km ↓，30P ↓→ 60 nf/km ↓ Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Insulation resistance 5000MW- Km DC 250~500V Near-End Cross-talk 40KHz，AC Min value：58.5dB↑Average value：66dB↑ Far-End Cross-talk 160KHz，AC m-1.28×S≧55dB/㎞以上 m：Average value S：Standard value Min value：38dB/km↑
CCP-LAP
This cable is a polyethylene insulated, laminated-sheathed, unit type cable. 1. Scope: This cable is a polyethylene insulated, laminated-sheathed, unit type cable. 2. Wire Construction： Wire Quad NO. A-wire B-wire C-wire D-wire 1 Blue White Brown Black 2 Yellow White Brown Black 3 Green White Brown Black 4 Red White Brown Black 5 Violet White Brown Black 3.Core Forming： 10P～200P Pair PE tape Pair PE tape pair PE tape 1-10P Blue-Blue 71-80P Green-White 141-150P Violet-Brown 11-20P Yellow-Yellow 81-90P Red-White 151-160P Blue-Black 21-30P Green-Green 91-100P Violet-White 161-170P Yellow-Black 31-40P Red-Red 101-110P Blue-Brown 171-180P Green-Black 41-50P Violet-Violet 111-120P Yellow-Brown 181-190P Red-Black 51-60P Blue-White 121-130P Green-Brown 191-200P Violet-Black 61-70P Yellow-White 131-140P Red-Brown 300P～600P Pair PE tape Pair PE tape pair PE tape 1-50P Blue-Blue 201-250P Violet-Violet 401-450P Red-White 51-100P Yellow-Yellow 251-300P Blue-White 451-500P Violet-White 1011-150P Green-Green 301-350P Yellow-White 501-550P Blue-Brown 151-200P Red-Red 351-400P Green-White 551-600P Yellow-Brown 4．Structure： 4.1. Conductor：0.4± 0.01mm、0.5± 0.01mm、0.65± 0.02mm、0.9± 0.02mm 4.2. Number of pair：10、20、30、50、100、200、300、400、600 4.3. Insulation：PE 4.4. Twisted：Four insulated conductor shall be twisted together 4.5. Assembly：Arranged in accordance with the structure figure 4.6. Core Wrap：Non – hygroscopic dielectric tape 4.7. Shield：Laminated Aluminum shield 0.2mm thickness, longitudinally laid on with over lap. 4.8. Support Messenger：Galvanized steel wire 4.9. Sheath：PE 5. Standards： Dia. of conductor (mm) No. of pair (P) Insulation thickness (mm) Sheath thickness (mm) Galvanized steel wire Standard length (M) No./mm Sheath thickness (mm) CCP-LAP CCP-LAP-SS 0.4 10 0.13 1.7 7/1.8 1.0 500 1000 0.4 20 0.13 1.7 7/1.8 1.0 500 1000 0.4 30 0.13 1.7 7/1.8 1.0 500 1000 0.4 50 0.13 1.7 7/1.8 1.0 500 500 0.4 100 0.13 1.7 7/1.8 1.0 500 500 0.4 200 0.13 1.7 7/2.0 1.0 500 500 0.4 300 0.13 1.9 - - 500 - 0.4 400 0.13 2.0 - - 500 - 0.4 600 0.13 2.1 - - 500 - 0.5 10 0.15 1.7 7/1.8 1.0 500 1000 0.5 20 0.15 1.7 7/1.8 1.0 500 1000 0.5 30 0.15 1.7 7/1.8 1.0 500 1000 0.5 50 0.15 1.7 7/1.8 1.0 500 500 0.5 100 0.15 1.7 7/2.0 1.0 500 500 0.5 200 0.15 1.8 7/2.3 1.2 500 500 0.5 300 0.15 2.0 - - 500 - 0.5 400 0.15 2.1 - - 500 - 0.5 600 0.15 2.3 - - 500 - 0.65 10 0.20 1.7 7/1.8 1.0 500 1000 0.65 20 0.20 1.7 7/1.8 1.0 500 1000 0.65 30 0.20 1.7 7/1.8 1.0 500 1000 0.65 50 0.20 1.7 7/2.0 1.0 500 500 0.65 100 0.20 1.8 7/2.3 1.2 500 500 0.65 200 0.20 2.0 - - 500 - 0.65 300 0.20 2.2 - - 345 - 0.65 400 0.20 2.3 - - 345 - 0.65 600 0.20 2.6 - - 345 - 0.9 10 0.27 1.7 7/1.8 1.0 500 500 0.9 20 0.27 1.7 7/1.8 1.0 500 500 0.9 30 0.27 1.7 7/2.0 1.0 500 500 0.9 50 0.27 1.8 7/2.3 1.2 500 500 0.9 100 0.27 2.0 - - 500 - 6. Electric Properties： Item 0.4 0.5 0.65 0.9 Conductor resistance Standard value：139Ω/KMMax. value：147.5Ω/KM Standard value：88.7Ω/KMMax. value：93.5Ω/KM Standard value：52.5Ω/KMMax. value：56.5Ω/KM Standard value：27.4Ω/KMMax. value：29.0Ω/KM Mutual capacitance 50P↑→ 55 nf/km ↓，30P(含) ↓→ 60 nf/km ↓ Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Insulation resistance 5000MW- Km DC 250~500V Near-End Cross-talk 40KHz，AC Min value：58.5dB↑Average value：66dB↑ Far-End Cross-talk 160KHz，AC m-1.28×S≧55dB/㎞以上 m：Average value S：Standard value Min value：38dB/km↑
PE-PVC
This cable is a polyethylene insulated, PVC sheathed, unit type cable for indoor installation. 1. Scope This cable is a polyethylene insulated, PVC sheathed, unit type cable for indoor installation. 2. Wire Construction： Wire Quad NO. A-wire B-wire C-wire D-wire 1 Blue White Brown Black 2 Yellow White Brown Black 3 Green White Brown Black 4 Red White Brown Black 5 Violet White Brown Black 3.Core Forming： 6P～200P Pair PE tape Pair PE tape pair PE tape 1-10P Blue-Blue 71-80P Green-White 141-150P Violet-Brown 11-20P Yellow-Yellow 81-90P Red-White 151-160P Blue-Black 21-30P Green-Green 91-100P Violet-White 161-170P Yellow-Black 31-40P Red-Red 101-110P Blue-Brown 171-180P Green-Black 41-50P Violet-Violet 111-120P Yellow-Brown 181-190P Red-Black 51-60P Blue-White 121-130P Green-Brown 191-200P Violet-Black 61-70P Yellow-White 131-140P Red-Brown 300P～600P Pair PE tape Pair PE tape pair PE tape 1-50P Blue-Blue 201-250P Violet-Violet 401-450P Red-White 51-100P Yellow-Yellow 251-300P Blue-White 451-500P Violet-White 1011-150P Green-Green 301-350P Yellow-White 501-550P Blue-Brown 151-200P Red-Red 351-400P Green-White 551-600P Yellow-Brown 4.Structure： 4.1. Conductor：0.4±0.01mm、0.5±0.01mm 4.2. Number of pair：6、10、20、30、50、100、200、300、400、600 4.3. Insulation：PE 4.4. Twisted：Four insulated conductor shall be twisted together 4.5. Assembly：Arranged in accordance with the structure figure 4.6. Core Wrap：0.025mm Thickness , mylar tape Min(overlap ratio 33%) 4.7. Drain wire：7/0.16 Tinned Copper Wire 4.8. Shield：0.05mm Thickness , Al-mylar tape Min(overlap ratio 33%) ,with Al side in 4.9. Sheath：PE 5. Standards： Dia. of conductor (mm) No. of pair (P) Insulation thickness (mm) cable core diameter (mm) approx. Sheath thickness (mm) overall diameter (mm) approx. estimated weight (Kg/m) Standard length (M) 6 0.13 4 1.3 7 52 500 10 0.13 5 1.3 8 69 500 20 0.13 6 1.3 9 109 500 30 0.13 7 1.3 10 143 500 0.4 50 0.13 10 1.4 13 218 500 100 0.13 14 1.6 17 397 500 200 0.13 18 1.9 22 746 500 300 0.13 23 2.0 27 1076 500 400 0.13 26 2.3 31 1427 500 600 0.13 31 2.4 36 2061 500 6 0.15 5 1.3 8 67 500 10 0.15 6 1.3 9 90 500 20 0.15 7 1.3 10 146 500 30 0.15 9 1.3 12 198 500 0.5 50 0.15 12 1.4 15 309 500 100 0.15 16 1.6 20 565 500 200 0.15 22 2.0 26 1087 500 300 0.15 27 2.1 31 1577 500 400 0.15 31 2.4 36 2092 500 600 0.15 38 2.5 43 3044 500 6. Electric Properties： Item 0.4 0.5 Conductor resistance Standard value：139Ω/KMMax. value：147.5Ω/KM Standard value：88.7Ω/KMMax. value：93.5Ω/KM Mutual capacitance 50P↑→ 55 nf/km ↓，30P ↓→ 60 nf/km ↓ Dielectric strength DC 500V / 1min. or AC 350 V / 1min. Insulation resistance 5000MW- Km DC 250~500V Near-End Cross-talk 40KHz，AC Min value：58.5dB↑Average value：66dB↑ Far-End Cross-talk 160KHz，AC m-1.28×S≧55dB/㎞以上 m：Average value S：Standard value Min value：38dB/km↑
PCM ( E1 ) Swith board Cable (each pair Individually shielded)
This cable is used for interconnecting between frames of PCM equipments with 120W characteristic impedance. 1.Application：This cable is used for interconnecting between frames of PCM equipments with 120W characteristic impedance.2. Conductor：Annealed bare copper or tinned copper3. Insulation：Foamed PE / HDPE4.Shielded：Two wires are twisted to form a pair then shielded with a layer of Al-Mylar foil. A piece of tinned copper wire is added along with the pair as drain wire.5.Assembly：Suitable number of pairs are assembled to form a cable core.6. Overall shield：a. Layer of Al-Mylar foil with a drain wire.7.Sheath：PVC (polyvinyl Chloride)or LSNHFRPE.( ow-moke Non-Halogen Flame Retardant Polyethylene). 8. Structure： Conducyor Pair Insulation Cable core Sheath Overall Standard Diameter(mm) (P) Diameter(mm) Diameter(mm) Thickness(mm) Diameter(mm) Length(M) 0.5 1 1.3 3.5 0.6 5.0 200 2 6.0 0.6 7.5 200 4 7.0 0.6 8.5 500 8 10.0 0.6 11.5 500 10 10.0 0.6 11.5 500 16 13.5 0.8 16.0 500 22 16.0 1.0 18.3 500 25 16.0 1.0 18.5 500 32 19.0 1.0 21.5 500 40 21.0 1.5 24.5 500 9. Characteristics： Items Specification Conductor Resistance ( 20℃ ) Max.100.2W / Km Conductor Resistance unbalance( 20℃ ) Max.5 ﹪ Insulation Resistance ( 20℃，DC 500V / 1min.) Min .5000M - Km Dielectric strength DC 1000V / 1min. Between Conductors DC 1500V / 1min. Between Conductors and shield Static Capacitance (1KHz) Max.50 nf / Km Attenuation. (1024 KHz) Max.34 dB / Km Characteristic Impedance (1024 KHz) 120 ± 10W Near-end cross talk (1024 KHz) Min.70 dB / 500M 10. Marking：TATUNG CO. PCM – E1 0.5 ´ð P yearðM
